How To Download And Install Hl Booster In Counter Strike

Download  here The hl booster.rar , unzipp the file (directly in addons or copy the booster folder in HLDScstrikeaddons, (HLDS is the directory where you have the server), then edit in HLDScstrikeaddonsmetamodplugins.ini,the
line:win32 addonshlboosterdlls ooster_mm.dll. Very important!!!! In order to work, in the HLDScstrikeserver.cfg you have to write the next line:

exec addons/hlbooster/hlbooster.cfg

Please UnCheck The Tick/Mark

Download HL-Booster

Read More..

How To Remove a Battery Pack From Nokia 6500 Silde Model

You may want to remove the battery pack from your Nokia 6500 slide mobile phone, if you want to replace it or find out what the IMEI number is. To do this successfully, without breaking anything, follow the step by step instructions that are provided to help with the removal.

1) Hold the Power button down on the keypad to turn it off. You dont want to remove the battery pack when the phone is on because it can cause the firmware to get corrupted.

2) You will need to remove the back panel/cover. Look at the top edge of the phone, near the camera lens, you will see a small release button.

3) Using the tip of your finger, press the release button down to unlock the back panel. Then grasp the back cover with your hands around all of its edges and push it upwards to remove it.

4) Now the battery pack will be exposed. To remove it, turn the phone to one side and tap it on the palm of your hand. The battery pack will then detach itself from the device and fall into you hand. The type of model for this battery is a BP-5M and its rated at 3.7 volts.

Read More..

How Long Does a Smoke Alarm Battery Last

A smoke alarm is powered from a 9 volt battery that is connected to a battery snap inside the smoke alarm. On average, a smoke alarm that is powered by a battery lasts about one year, if you leave the same battery in it for more than one year, you are taking a risk because it might not have enough power to trigger the smoke alarm to warn you if there is a fire in your house. So if it has been more than a year and you have tested your smoke alarm battery and the fire detector alarm seems to work fine, still replace the battery with a brand new one, even if it still works. It is not worth taking the risk, as a smoke detector can save your life, so pay the 50p for a new battery and dont cry about it.

Read More..

How To Make Your Car Run Quiter On The Road Inside

If your car sounds really loud, then your probably want to quite youre car down, if you do want to make your car quite, i have listed all the possible ways you can achieve that with your car, just below:

1)If the engine inside your car is really loud and very noisy, then it might need a top up of engine oil, this is to lubricate the components, making them run smoother and quieter. To check if your car needs some engine oil, turn off your car engine and open the hood. Locate the dip stick and pull it out, then wipe the stick clean, then replace it back into the engine. Then pull it out again and look at both sides of the dipstick, this is to see the colour of the oil that is on the dip stick. The dip stick should have two letters "L" that stands for low and "H" that stands for high. If the the oil on the dip stick reached near the letter "L", then engine will need topping up with engine oil.

2)Turn off the car radio and turn off any other electronics that make noise, things like wipers or heaters.

3)If your car has a performance exhaust with a decat pipe, the exhaust will sound really loud and beefy, however if you dont like it, remove the complete exhaust with a stock exhaust system.

4)If your car has a cold air intake, remove it and replace it with a stock air filter system. Replacing it with a stock air filter system will make the car engine sound quieter because aftermarket cold air intakes make a loud air rushing noise when you put your foot down.

5)If your car has noisy hydraulic lifters, you can make them quieter by pouring in a quick fix solution into the car engine. They way to identify if the hydraulic lifters are noisy, open the hood on the car, if you hear a constant tapping noise, your car engine has noisy hydraulic tappers. A product that i would recommend to you is called "Wynns hydraulic valve lifter treatment". Just pour it into the engine oil and it will lubricate noisy hydraulic lifters, making them quieter than before.

6)If your car has squealing breaks, it is very likely that the break pads are worn out. So replace them and you will have better breaking response and quieter brakes. 

7)Also make sure the spark plugs inside your car are in good condition. Bad spark plugs can cause the car engine to make a backfire sound, which can be annoying and loud.

Read More..

How To Fix a PSP That Freezes and Shuts Off Itself

If your psp console freezes up, shuts down itself without you turning it off using the power switch and you are playing back up iso games from a memory stick, using customer firmware, the game might be a bad rip. Sometimes games dont get ripped properly due to the lack of experience and the game file becomes faulty, which can cause the psp to freeze and crash during game play. So i suggest you re-rip, or download a different copy of that game from a different website and the problem should be resolved. 

If your psp freezes and turns itself off, if you are playing a game from a umd disc, it might be dirty. So get a soft lint free cloth and clean the umd disc that you are experiencing freezing problems with.

If your psp freezes and then shuts off on the start up menu on the psp console, it is likely the firmware that is running on your psp is damaged. If experiencing freezing problems on a psp that is running custom or official firmware, you can hard reset the firmware, which should repair minor damaged firmware. This is by holding the power button in the up position for 10 seconds. If you have hard reset the firmware and your psp is still freezes up on the start up menu, you will need to manually erase the firmware off your psp console and reinstall new firmware onto the psp.

Read More..

How To Connect a Car Head Unit Using a CB Radio Power Supply

A CB radio power supply can produce around 12-13 volts, which is required for a car head unit to power on. This means that you can hook up your car head unit in your house, using a CB radio power supply, without blowing it up. I have connected many car head units to various CB radio power supplies in the past, when i used car audio in my own home. You will require a power supply that is a minimum of 7 amps or more, in order to power on your car head unit.

Instructions 

1)First power off the power supply and unplug it from the electrical outlet.

2)On the wiring hardness, you will need to locate the memory wire, which is a yellow colour, a positive, which is a red colour and a ground wire, which is a black colour wire. If the wires on the wiring hardness are not colored, then look online for a wiring diagram for your specific car head unit.

3)Use wire strippers to remove the braid from all three wires, if they dont have any braid.

4)Once you have done that, connect the red colour positive wire together with the yellow colour memory wire and connect them into the positive screw terminal on your CB radio power pack.

5)Then connect the black colour ground wire into the negative screw terminal on your CB radio power pack.

6)The car head unit will power on, now all you need to connect are your speakers.

Read More..

How To Fix a PSP Go Thats Not Connecting To a Wi Fi Internet Network

If your psp go console doesnt connect to the internet successfully through a wireless router with a active internet connection, first you will have to identify what is the cause to the problems.

Below i have underlined the cause and below it i have listed the solution on how to fix it:

My psp go cant find my wireless router?

If your psp cant find your wireless router, make sure the Wi-Fi router and the Wi-Fi on the psp go is switched on. Also make sure you Wi-Fi router is in infrastructure mode, if the wireless router is in adhoc mode, your psp go will not find its access point name, as the psp go can only pick up Wi-Fi routers that produce a infrastructure signal.

My psp go has found my Wi-Fi access point, but it will not allow my psp go to connect to it?

If your psp go will not allow itself to connect to the wireless router, the first thing to make sure is if your Wi-Fi router is connect to a live active internet connection. The second thing why the psp go could be failing to connect to the wireless router internet access point it could be because it is password protected. If it is password protected, then insert the password into the access point on your psp go console and the problem should be resolved. Also make sure the psp go has a minimum of 35% of signal strength from your Wi-Fi router, as below that percentage the psp will fail to connect to the access point and as a result your psp will have a connection error.

The internet is not supported on my psp go?

If the internet is not supported on your psp go, then i suggest you to change the type of security encryption you are using on your wireless router to WPA or WEP, but only if you using types that are not supported by the psp go, such as using WAP.

Read More..

How To Remove Scratches From My PSP LCD Screen Using Displex Polish

The PSP consoles front faceplate covers the main internal LCD screen of the portable gaming device. This protects the main screen from getting damaged or scratched during use. Using your PSP on a daily basis, will cause the outer screen to become scratched and they will be clearly visible in direct sunlight. Most gamers who are concerned about this issue, will apply a plastic peelable screen protector beforehand onto the outer screen to prevent it getting permanently scratched. If you are bothered about the scratches seen on your PSP screen, you can polish them out using Displex polish. It contains special cleaning ingredients that when polished in, it will buff out light surface scratches out. Not only can it be used for your PSP screen, it can also be used on mobile phones and tablets. Though bear in mind that if the scratches are really deep that you can feel them grooved in the screen, your best bet is to replace the front faceplate with a brand new one because they will not fade out using the polish method. It will be a waste of money and time.

1) The polish that you are going to use to buff out the scratches off the screen will come in a small red color tube. So remove the protective cap from the top of it, then give the tube a squeeze and apply lots of polish onto a lint free soft cloth. This is the best type of cloth for this restoration because it is dust free and wont cause more scratches to appear on the screen. Dont use a regular tissue paper from the box because that will cause more scratches to appear.

2) Using the side the polish is applied onto the cloth, place it on the outer screen, found on the front faceplate and rub it in rapidly in circular motions continuously for a minimum of 5 minutes. Dont give up polishing within a few minutes because it simply wont work that great. During this process, the polish will be rubbed into the screens plastic and will eventually be buffed out.

3) Once you have removed the scratches completely and they are no longer visible, replace the plastic cap onto the Displex polish tube to prevent it drying out. This is ideal to do because you can use it next time when you want to remove scratches off the PSP screen or other devices such as your mobile phone or tablet.

Read More..

How To Reset Samsung E700 Security Privacy Password Code To Default

Samsung has included a special feature on the E700, which allows you to add a security password to prevent other people using the phone to gain access to personal messages and multimedia content, such as music, images and videos. However, if you have added a password code accidentally or you have forgotten what it is, you are basically restricted of accessing certain content on the phone, unless you have the correct privacy password. This can be a very problematic situation, but dont worry because there is a clever & free method to completely remove the password, without actually sending it to the manufacturer to sort out.

WARNING!: Before proceeding with this operation, back up all important content that is stored onto the phones memory onto a second mobile phone via Bluetooth because it will all be deleted after completion.

1) Ensure that your Samsung E700 is switched on.

2) Enter the following code into the dialer keypad *2767*2878#. 

3) Once typed in correctly, the mobile phone will reset the password and format all content that is stored onto the phones internal memory.

4) If done successfully, the Samsung E700 will restart and the password code will be gone.

Read More..

How To Make a Car Head Unit Turn On With The Ignition Off

If you have an in car dvd player in your car and want to watch a movie or want to listen to some music, when you turn the ignition off, it is possible. Most car head units have two coloured wires, one wire which is the colour "Yellow", which is the wire that acts as a ignition live and the other wire that is the colour "Red", which acts as a constant live. If you car stereo turns off, when you turn off the car engine, then the yellow wire is not connected with the red wire on the wiring harness and are not connected together to the cars permanent live.

To make your car head unit turn on and off with the ignition off, it involves you to connect both the red and yellow wires together.

1)Remove your car head unit from the cars dashboard, using a flat head screwdriver, push it into each side of the car head unit and pull out the stereo, as an alternative to remove it from your cars dashboard, if you dont have din tools.

2)Once you have removed the car head unit, look for "Red" and "Yellow" coloured wires on the wiring harness.

3)Once you have found both of them, using a wire stripper, strip of 1 cm of insulation off the yellow wire. 

3)Next connect the "Yellow" colour wire from the wiring harness, with the "Red" colour wire and using electrical insulation tape, tape up the exposed braid, this is to prevent the wire from touching other wires and causing a short circuit.

5)Push all the wires that are behind the car head unit, pushing them right back and then insert the car head unit back into the din slot, this is by pushing it in.

Read More..